I bought this pattern at the Stitch Festival in London earlier this year and last month I made the top version, to see how the sizing worked.
I cut a size 1 and the fit was fine. I used some leftover fabric from a Vogue repro vintage dress (V-8728) that I made back in 2013 and it came together pretty quickly. I followed the pattern instructions as written for this one.
Fast forward a few weeks and I've just finished the dress. This time I made a few changes - I took out the centre back seam and cut the back bodice in one piece; I didn't use stitch & tear interfacing on the neckline and armholes, I staystitched them instead; I also bound the armholes on the inside rather than the outside and I made pocket bags, not the 'attached to the front bodice' version in the pattern. I used some linen which I've had in my stash for a while and it took 1.9m. It would probably have needed more if I'd cut bias binding for the armholes from it, but I used commercial binding instead.
I traced a size 2 skirt, (can't really remember why now... but might have been because it fitted better on the dot and cross paper that I used for tracing). I haven't top stitched the neckline - I'll see how it wears without it, should be OK because the facing is understitched and also tacked in place on the shoulder seams. I'm going to make more of these, and if they're in linen I shan't bother to interface the neckline facing - even with using very thin interfacing it feels quite bulky. The fabric I used for the top was a lot thinner so the interfacing was fine with that. Now, what shall I make next?





